Cino FuzzyScan F400 Series Informations techniques télécharger pdf (Page 10)

Out-of-range Scanning

When the radio is connected between the scanner and the remote host

device, the scanner will transmit each scanned data right after scanning the

barcode. However, the scanner is preset for unable to scan any barcode data

when it loses the radio connection with the remote host device.

If you enable the out-of-range scanning function, the scanner is able to

continue scanning barcode data while it is out of working range. All scanned

data will be temporarily stored into the memory buffer until radio link resumed.

Enable Out-of-range Scanning

Disable Out-of-range Scanning

◆

In case of the scanner is out of working range, you will hear 4 beeps in

descending tone to indicate the radio connection lost. The link indicator of

scanner will give 3 blue blinks per 2 seconds. Once the scanner is back to

working range, you will hear 4 beeps in ascending tone to indicate the radio

connection rebuilt and the scanner will give 1 blue blink per 2.5 seconds. At

the same time, all stored scanned data will be transmitted automatically right

after the radio link is resumed.

Presentation Scanning

The Presentation Scanning is designed for hand-free applications for user’s

convenience. If the “Presentation Scanning Auto-sense” function is enabled,

the scanner is capable of automatically switching to presentation mode when

you place it onto the SmartStand or cradle.

Enable Presentation Scanning Auto-sense

Disable Presentation Scanning Auto-sense

◆

Paging Function

The paging function is helpful for you to locate the paired smart cradle or

scanner. If you would like to page the paired smart cradle, you can scan

“Paging” command. If you would like to page the paired scanner, you can

press the paging/reset button of the smart cradle no longer than 3 seconds.

Paging/Reset Button

Paging

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Cino FuzzyScan F400 Series Informations techniques Page 10